Step 1:
Preparing your walls
Your walls need to be at level 4 - 5 and primed with a water based, latex primer
Step 2:
Apply the first coat
The thickest coat of the 3 coat process. Must use Stainless steel trowel only, other wise product can be stained by metal. No straight lines and do not go over the same area too many times.
Step 3:
Apply the second coat
After first coat is fully dry (preferably overnight)apply enough material to completely cover the first coat and leave it smooth and unpolished. If necessary lightly sand high spots and corners with sanding block size 400. Apply thinly and evenly. Do not compress product.
|
